Safety and Standards

ISO 11898 and SAE J2411

Winmate offers Ultra Rugged Tablet PC for vehicle diagnostic, connecting to the many electronic control units (ECUs) in a vehicle. The connection is done through the CAN protocol defined by international ISO 11898 and SAE J2411, which supports distributed real-time control and multiplexing for use within road vehicles.

ISO 11898-1:2003 Road vehicles -- Controller area network (CAN) -- Part 1: Data link layer and physical signaling
ISO 11898-2:2003 Road vehicles -- Controller area network (CAN) -- Part 2: High-speed medium access unit
ISO 11898-3:2006 Road vehicles -- Controller area network (CAN) -- Part 3: Low-speed, fault-tolerant, medium-dependent interface
SAE J2411 Single Wire Can Network for Vehicle Applications

Through CAN-Bus, users are able to access:

Engine Management Fuel Injection
Engine Diagnostics
Exhaust Emissions
Chassis Control ABS
Traction control
Electronic stability program
Control Panels Climate
Door Switches
Central Lock
Sensors Light Sensor
Rain Sensor
Occupancy Sensors
Motors Seat Position Motors
Automatic Mirror Motors


The MIL-STD-810G test series are approved for use by all departments and agencies of the United States Department of Defense (DoD). MIL-STD-810G addresses a broad range of environmental conditions that include: low pressure for altitude testing; exposure to high and low temperatures plus temperature shock (both operating and in storage); rain (including wind blown and freezing rain); humidity, fungus, salt fog for rust testing; sand and dust exposure; explosive atmosphere; leakage; acceleration; shock and transport shock; gunfire vibration; and random vibration. The standard describes environmental management and engineering processes that can be of enormous value to generate confidence in the environmental worthiness and overall durability of a system design.

MIL-STD-810G Method 501.4 High Temperature
MIL-STD-810G Method 502.4 Low Temperature
MIL-STD-810G Method 506.4 Rain / Water Resistance
MIL-STD-810G Method 507.4 Humidity
MIL-STD-810G Method 514.5 Vibration
MIL-STD-810G Method 516.5 Shock
MIL-STD-810G Method 503.4 Temperature Shock
MIL-STD-810G Method 500.4 Low Pressure


MIL-STD-461 is a United States Military Standard that describes how to test equipment for electromagnetic compatibility.

Specifically, MIL-STD 461F details testing specification to ensure the conducted emissions (CE), conducted susceptibility (CS), radiated emissions (RE), and radiated susceptibility (RS) of a system can meet the requirements for the control of electromagnetic interference.

MIL-STD-461 Method - CE101 / CE102 Conducted Emissions
MIL-STD-461 Method - CS101 / CS106 / CS109 / CS114 / CS115 / CS116 Conducted Susceptibility
MIL-STD-461 Method - RS101 / RS103 Radiated Susceptibility
MIL-STD-461 Method - RE101 / RE102 Radiated Emissions