ML-1280
High-efficiency DC/DC Converter Module (Compliant with MIL-STD-1275E )
KEY FEATURES
- Compliant with MIL-STD-1275E standard
- High-efficiency DC-DC Power Converter Board
- Low inrush current Power Converter Board
- Output over-current protection
- Input power reverse polarity protection
- Surge stopper circuit design
- 6600W high power transient voltage suppressor
- eFuse for under voltage/over voltage/overload/over temperature protection
- Wide range input power converter
MIL-STD-1275E" title="MIL-STD-1275E 
FCC" title="FCC 
CE" title="CE
CERTIFICATIONS
ML-1280
High-efficiency DC/DC Converter Module (Compliant with MIL-STD-1275E )
Product Details
Compliant with MIL-STD-1275E Standard
Winmate’s ML-1280 PCB advanced power converter board meticulously engineered to comply with the MIL-STD-1275E standard, ensuring unparalleled performance in military applications. With a surge stopper circuit, this technology swiftly intercepts and neutralizes voltage spikes and surges, guaranteeing the safety and longevity of electronic components.
High-Power Transient Voltage Suppressor
With the 6600W capacity, Winmate ML-1280 PCB serves as the ultimate safeguard, ensuring the safety and reliability of electronic circuits. This enhanced protection ensures the longevity and reliability of sensitive devices, reducing the risk of malfunctions or failures.
Comprehensive eFuse Protection
Winmate’s ML-1280 PCB features a comprehensive eFuse protection for unparalleled reliability. Designed with meticulous precision, this advanced power converter board ensures the safeguarding of electronic components through a comprehensive eFuse system.
Wide Range Input Power Converter
Winmate ML-1280 PCB supports a wide voltage range of 9-36V. This adaptability to various power inputs provides flexibility and convenience for a range of applications while excelling in robust performance across diverse environmental conditions, from -20 to 70 degrees Celsius.
Reverse Polarity Safeguard for Input Power
Winmate’s ML-1280 PCB sets a new standard in power converter technology with its integral Reverse Polarity Safeguard for Input Power, ensuring the secure operation of electronic systems by preventing potential damage caused by reversed power connections.
Specification
Input Voltage
9V to 36V DC
Load Range
12V 6.67A
Power Consumption
80W
Ripple And Noise
Less than 120mV
Line Regulation
Less than ±1% at rated 9~36V input voltage
Load Regulation
Less than ±5%
Efficiency
Up to 90% (Full loading)
Protection
OCP protection
OVP protection
Certification
CE, FCC
Compliance
Compliant with MIL-STD-1275E
Operating Humidity
10% to 90% RH, Non-Condensing
Operating Temperature
0°C to 50°C
Storage Temperature
-20°C to 70°C
Altitude
0 to 10000ft
Dimension
110 x 50 x 18.1 mm
Product FAQs
What is the Winmate ML-1280 DC/DC converter module used for?
The ML-1280 converts 9–36 V DC input to a 12 V DC output with a listed 80 W rating. It is a power-conversion component for compatible industrial or mobile equipment, not a complete power system.
What input voltage does ML-1280 accept?
The detailed input specification lists 9–36 V DC. Check the actual supply, transients and connector wiring before integration.
What output voltage, current and power are listed for ML-1280?
The page lists 12 V, 6.67 A in its load-range entry and 80 W as nominal power. Size the continuous load using the rated power and account for temperature; do not treat the current figure alone as a system guarantee.
Does ML-1280 provide electrical isolation?
The detailed specification does not state isolation for this model. Do not assume galvanic separation without a model-specific confirmation.
What conversion efficiency and ripple are specified for ML-1280?
Efficiency is listed as up to 90% at full load, with ripple and noise below 120 mV. These are stated specification values, not a site-level performance guarantee.
What output protections are documented for ML-1280?
The detailed table lists over-current protection (OCP) and over-voltage protection (OVP). Evaluate upstream fusing and system-level protection for the installed equipment.
What operating temperature and humidity apply to ML-1280?
The listed operating range is 0–50°C and 10–90% RH, non-condensing. Assess heat dissipation inside the finished enclosure.
What are the dimensions of ML-1280?
The detailed mechanical entry lists 110 × 50 × 18.1 mm. Confirm clearances, fasteners and cable access against the mechanical drawing.
Which compliance or certification entries are listed for ML-1280?
CE and FCC are listed under Certification. MIL-STD-1275E appears separately under Compliance; it is not labeled as certification. Do not apply a component-level statement to the finished vehicle or system without separate assessment.
What should be checked before integrating ML-1280 into mobile or field equipment?
Match 9–36 V input, 12 V output, 80 W rating, startup demand and environmental design. No ignition-control option is listed in the detailed entry. Confirm the ordered revision and wiring diagram.
