O_SiteMapTree_Link 'B0108070116',5,'Y',1,'V_SiteMap'

IBMH100

IBMH100
M-Series Box PC with Intel® Atom™ E3845
Features
  • Modular design
  • Auto detection of the connected display, No settings necessary
  • Quick & Easy Replaceable Hard Disk Design, No Tools required
  • Supports wide range 12-24V DC input
  • Optional Modular Front Display as a Panel PC
  • Internal 64GB mSATA SSD, Removable 1 Bay 2.5” SSD Slot
  • System Specification

    ProcessorIntel® Atom™ E3845 Processor;
    2M Cache up to 1.91 GHz
    BIOSAMI UEFI BIOS
    System MemorySODIMM DDR3L-1600 4GB (Optional up to 8GB with 2 slots)
    Graphic ChipsetIntel® HD graphics
    Ethernet Controller1000 Base-Tx Gigabit Ethernet Compatible
    Serial1 x RS232/ 422 / 485 selected by jumper
    USB4 x USB 2.0
    Storage
  • Main Storage: Default 2.5" 64GB SSD
  • Second Storage (Optional): Removable 2.5” SSD x 1
  • AudioRealtek ALC886 codec

    I/O Connectors

    Front Side I/O
  • 1 x DC in 12-24V (Terminal Block 3pin)
  • 2 x Gigabit LAN
  • 4 x USB 2.0
  • 1 x HDMI Output
  • 1 x D-Sub15 (VGA) Output
  • 1 x RS232/422/485 selectable serial port
  • 1 x Audio In Jack
  • 1 x Audio Out Jack
  • 1 x Reset Key
  • 1 x Power Button
  • 2.5” SSD Indicator
  • Mechanical and Environment

    Dimensions (L x W)276.18(L) x 228.80(W) x 45.20(H)
    ConstructionAluminum housing
    MountingDesktop/Wall Mount (Optional Panel Mount with Front Display)

    Mechanical & Environment Specification

    Operating Temperature0 ~ +50°C
    Operating Humidity30%-95% at 40°C (non-condensing, RH)

    Product Spec

    OS
  • Windows 10 IoT Enterprise
  • Windows Embedded 8 Standard
  • Windows Embedded Standard 7
  • Power Management

    Power Input12-24V DC in with protection Fuse
    Power Adapter110-240 AC to 12V DC out 80W power Adapter

    Packing List

    Standard Packing List
  • 1 x Driver CD
  • 1 x 110-240 AC to 12V DC out 80W power Adapter
  • 1 x Terminal Block female connector
  • 1 x Power Cord
    • Note: All Specifications are subject to change without prior notice!
      *If you use SBC on-board RS485, you need to set appropriate state that can perform auto-direction hardware function