Safety and Standards


Maritime products certifications: DNV 2.4, IEC60945, IACS-E10

Winmate marine products are built and tested according to DNV standard certification 2.4, IEC60945, and IACS-E10 and most of the products are certified by Det Norske Veritas (DNV), the Norwegian foundation internationally certifying materials, components and system relevant to safe operation and quality of ships.

DNV 2.4 DET NORSKE VERITAS (DNV) is an autonomous and independent foundation with the objectives of safeguarding life, property and the environment at sea and on shore. DNV certification related to quality of ships, offshore units and installations of the system and components. DNV Requirements are harmonized with IACS Unified Requirements E10 and IEC publication 60945.
IACS-E10 International Association of Classification Societies (IACS) is an organization that provides technical support and guidance for promoting the safety of life, property and the environment through the verification of compliance with technical and engineering standards for the design, construction and life-cycle maintenance of ships, offshore units and other marine-related facilities.
IEC 60945 Equipment wished to be use in navigation and radio communication systems is to comply with IEC Publication No. 60945, "Maritime navigation and radio communication equipment and systems – General Requirements- Method of testing and required test results"

Standard for certification

DNV classifies tests in four levels base on the product applied location in ships-A, B, C, and D. For worse harsh environment use, the much strict standard testing is required. (See Table of Location Classes Selection Guide) Standards for Certification including contain principles, acceptance criteria and practical information related to the Society's consideration of objects, personnel, organizations, services and operations. A list of Standards for Certification is found in the latest edition of Pt.0 Ch.1 of the "Rules for Classification of Ships" and the "Rules for Classification of High Speed, Light Craft and Naval Surface Craft"

Column I Column II
Parameters Location within main area Main Areas On Board
Machinery spaces Control Room, Acc. Bridge Pump room, Holds, Rooms with no heating Open deck
Temperature Inside cubicles, desks, with temp rise 5oC or more B B B D D
All other locations A A A C D
Humidity Locations where special precautions are taken to avoid condensation A A A A A
All other locations B B B B B
Vibration On Machinery such as internal combustion engines, compressors, pumps, including piping on such machinery B - - B B
Masts - - - - C
All other locations A A A A A
EMC All locations within specified main areas A A B A B
Enclosure Submerged application D - - D D
Below floor plates in engine room C - - - -
All other locations B A A B C