IA70

IA70 Mini-ITX Motherboard with Intel Atom N270 1.6GHz Processor, Dual PCI-E GbE, LVDS/CRT, PCI-E(x16), DC-IN Power input
Features
  • Mini- ITX Form Factor (170mm X 170mm)

  • Inte Atom N270 1.6GHz Processor

  • Intel 945GSE / ICH7M Chipset

  • Integrated CRT/LVDS, shared memory up to 224MB

  • 1 x DDR2 DIMM, max. 2GB

  • Integrated Dual Gigabit Ethernet

  • 1 x Mini PCI, 1 x PCI-E(x1), 1 x PCI, 2 x SATA

  • 4 x COM, 8 x USB 2.0

  • DC-IN power input
    • Datasheet
     User Guide
    System Specification
    Form FactorMini-ITX
    ProcessorIntel Atom N270 1.6 GHz Processors
    BIOSAMI 4Mbit Flash
    System ChipsetIntel 945GSE / ICH7M Chipset
    System Memory1 x DIMM, Max 2GB DDR2 533/400
    Ethernet ControllerDual Realtek RTL8111B GigaLAN
    I/O ChipsetWinbond W83627EHG
    Serial3 x RS-232, 1 x RS-232/422/485*
    USB8 x USB2.0
    KB / Mouse Connector2 x PS/2
    IDE1 x 44pins IDE
    SATA2 x SATA II
    Expansion Slot1 x Mini PCI,1 x PCI, 1 x PCI-E(x1)
    Watchdog Timer256 levels
    I/O Connectors
    Back Side I/O2 x RJ-45(1000 Mbps), 2 x PS/2, 2 x RS-232 Conn, 1 x RS-232/422/485* Conn, 1 x VGA Conn, 4 x USB, 1 x DC-IN power Jack, 1 x Mic in/Line in/Line Out(Optional)
    Internal I/O pin-header1 x RS-232, 4 x USB, 1 x 44pin IDE, 2 x SATA Conn,
    Graphic Specification
    Graphic ControllerIntegrated in Intel 945GSE, LVDS/CRT
    Graphic MemoryShared momery, max. 224MB
    LVDSDual Channel 18-bit LVDS (Optional Dual Channel 24-bit LVDS or DVI)
    Audio Specification
    Audio ControllerBuilt-in audio + AC97 codec,
    Audio InterfaceMicrophone in, Line in, Line out(Optional) SAMHOP SM7512 amplifier
    Environment Specification
    Dimensions ( L x W )170 mm x 170 mm ( Mini-ITX Form Factor )
    Power RequirementIntel Atom N270 1.6GHz GHz w/ 1GB DDR2 x 2 - 3D MARK, +12V/4A
    Power InputDC-IN Power input
    Operating Temperature0 deg.C to 60 deg.C
    Operating Humidity30% to 90% (non condensing)
    CertificationsCE, FCC, RoHS
    Note: All Specifications are subject to change without prior notice!
    *If you use SBC on-board RS485, you need to set appropriate state of RTS line before sending/receiving data in your software program.We offer additional board that can perform auto-direction hardware function.